// WIRED US/UK — LINUX & OPEN SOURCE
Bublue BuVortex V5 Pool Skimmer Review: An Impractical Cleaner
Pool skimmers, which flit along the surface of the water, constitute a small but stable subsection of the pool robot world. While their effectiveness varies, all of them work more or less the same way, cruising around the pool on a catamaran-like body, scooping up leaves into a basket that sits between the two propeller-powered hulls.
Until now. Enter the Bublue BuVortex V5, billed as “the world’s first active absorption skimmer.” I don’t have a clue what that means, but the simple explanation of how it works can be found in the “vortex” part of the name. Rather than gathering debris into a mouthlike chamber, the BuVortex creates a tiny whirlpool that draws nearby debris into it, sinking leaves and trapping them in an underwater basket.
The device exemplifies, without question, the weirdest concept I’ve ever seen for cleaning the surface of a pool, but of course I had to wonder if it was so crazy it just might work, so I put it to the test in my own pool for a week, giving it free rein to collect both standard organic debris and synthetic leaves.
The 11.5-pound Bublue BuVortex V5 is built around a central cylinder about a foot in diameter that houses the vortex-creation system. Above that sits the filter basket, in two parts, including a bit of netting that prevents trapped debris from escaping the whirlpool once it gets sucked in.
Surrounding the cylinder are four arms that help the device float and stay upright. One of the arms contains the power port and on/off button, plus a Bluetooth button used to initiate pairing with the Bublue mobile app. The only additional component is a mesh filter that sits underneath the filter basket. This filter, in turn, is held inside a circular frame, which holds it in place. All told, there are five pieces to the device, a fact that will become more important later when I discuss cleanup.
Put together, the robot is quite tall, needing a full 1.5 feet of water depth in which to operate.
Your first order of business with the BuVortex V5 is to charge its 7800 mAh battery, as—and this is essential—the unit has no solar-power charging function, a standard feature on traditional pool skimmer robots. The unit takes a sizable four hours to charge and is specified to run for three. I got close to four hours of runtime during my testing.
The lack of solar power alone may be something of a deal-breaker for most. (It is for me, at least.) When I use a pool skimmer, I typically drop it in the pool and have it run for a week or more, letting it sleep overnight when the battery is drained and firing it up again in the morning when the sun is out. The beauty of solar power on a skimmer is that you don’t have to think about it. I can’t remember the last time I plugged mine in. The only time I take the skimmer out of the pool is to periodically clean it.
Even with four hours of running time, operationally, the device makes little sense. Imagine the occasions when you need a skimmer the most—during the fall, especially, when leaves are continually falling. Four hours of skimming won’t put a dent in a day’s worth of debris landing on the surface of your pool, and even if you dutifully retrieve the robot, recharge it, and run it a second time, you’re still accounting for only a third of a 24-hour period. While no skimmer is perfect, with the BuVortex, there’s just no way to prevent most leaves from ending up on the floor of the pool or, at best, in a wall skimmer.
In action, the BuVortex bobs around the pool seemingly at random—at a rate of up to 33 feet per minute—though a “corner boost” mode did seem to sequester the robot more to the edges of the pool. That said, most of the leaves throughout my testing seemed to hover more in the middle, making this mode less effective in my environment. Quantitatively, the unit performed decently by the end of its run, collecting about 70 percent of my test leaves and sinking 20 percent.