// TOM'S HARDWARE US — HARDWARE & GADGET
Quad 8-pin mod protects the $8,500 RTX 5090 you can’t replace from melting
RTX 5090 production halts make protecting your GPU from meltdowns critical
When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.
Nvidia’s GeForce RTX 5090, undeniably one of the best graphics cards of our time, vanished overnight without a trace and is now selling for $8,500 on Amazon. In a recent development, Reddit user DallasGrave showcased a custom quad 8-pin power conversion kit designed for the notorious melting 16-pin (12VHPWR) power connector and the later 12V-2x6 revision. This invention, an upgrade over a previous mod, could reduce the risk of power-related meltdowns.
Unlike the endless stream of aftermarket adapters designed solely to prevent 16-pin power meltdowns, DallasGrave's iteration is more like a power-conversion kit. The direct-mount kit sits above the graphics card and uses a custom harness soldered to the graphics card’s PCB power rails. The quad 8-pin power conversion kit bypasses the 16-pin connection and redistributes the massive power draw more evenly across four conventional 8-pin PCIe power connectors.
Each 8-pin PCIe power connector can deliver up to 150W, so all four combined in this custom configuration match the 16-pin connector’s maximum capacity of 600W. However, this configuration addresses concerns with the 16-pin power connector, which channels 50A through a small, tightly packed set of pins. The power-conversion kit instead spreads the load across four 8-pin PCIe power connectors, which are physically larger and allow a wider pin pitch.
While 8-pin PCIe power connectors are not entirely immune to melting or other power-related failures, such incidents are far less common than issues with 16-pin power connectors. The 16-pin power connector is significantly more compact than a single 8-pin power connector and carries 4X the wattage, so it is more prone to higher current density and heat buildup.
According to PCI-SIG specifications, each of the six power pins inside the 16-pin power connector is rated for a maximum current of 9.5A. This means that, in theory, the power connector's total capacity reaches up to 684W or 57A. For example, 600W (50A) requires each power pin to carry about 8.33A, which is already close to the recommended safety limits.
By contrast, a standard 8-pin PCIe power connector contains three power pins. Combining four of these connectors in tandem provides 12 power pins. When distributing a 50A load across 12 pins, each pin carries just 4.17 amps, about half the current per pin of the 16-pin power connector design. This lower current per pin dramatically reduces wire and terminal temperatures and lowers the risk of heat-related damage.
The quad 8-pin power conversion kit tricks the sense pins on the 16-pin power connection into recognizing the full 600W. However, the Redditor claims they have tested the kit for up to 800W with a shunt mod. The beauty of the kit is that users can use it as a standalone power source or alongside the native 16-pin power connector, essentially acting as a parallel load spreader.
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.